Cut/copy/paste an element, Remove element – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 149

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
136
C
UT
/C
OPY
/P
ASTE AN ELEMENT
The operator can cut, copy and paste one or several elements
within the list using familiar windows operation keys (ctrl + c, ctrl
+ v, and ctrl + x), or by using a right mouse click to open the
contextual menu when the required elements have been
selected.
• A Cut and Paste operation will move the selected elements.
• A Copy and Paste operation will copy the selected elements.
The elements are inserted in the play-list before or after the
element selected when the paste operation is initiated (this
depends on the ‘Insert mode in play-list’ parameter of the play-
list settings d in the ‘Insert Mode in Play-List’ section, on page
169.
The Cut/Copy/Paste operation can also be performed from one
tab to another.
R
EMOVE
E
LEMENT
To remove a selected element or elements from the play-list,
select remove element from the contextual menu. A confirmation
message will be displayed dependant on the status of the play-
list being edited:
If the play-list is off-line:
If the play-list is on-line or on-air:
ON AIR is displayed if the play-list is on air. On-line is displayed
if the play-list is on-line but not on air.