13 d, Irect, Ccess – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual

Page 57: Uttons to the, Rains on the, Huttle

Issue 4.3.C

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment

Note
By right-clicking on the E/E button a contextual menu
will show the available record trains. Selecting a train
will go to that train at its current position. A train which
is being played through the network to this output
channel will be approximately 3 seconds behind current

network timecode.

The text below the E/E button indicates the record train which
the channel will return to when the E/E button is pressed.

4.5.13 D

IRECT

CCESS

UTTONS TO THE

RAINS ON

THE

HUTTLE

PRO

There are also direct access buttons on the ShuttlePRO
controller to select trains on a channel:

PREVIOUS TRAIN: Selects the previously selected Record train,
pressing twice moves back another selection, etc…

NEXT TRAIN: Selects the next Record train, if on the ‘cam A’
train it will move to ‘cam B’, etc…

SELECT TRAIN: Calls up on the screen a list of channels
available. By moving the jog dial you can move through the list
to highlight the required train and press Select Train again to

select it and exit the menu.