EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 58)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment Issue 4.3.C
45
4.5.14 S
NAP
I
CON
OR OR
Returns the media to the last point where the E/E mode was
exited, effectively “snapping” back to where the user left off in
the record material.
4.5.15 R
ET
I
CON
OR OR
The button becomes active if the channel is within a clip. By
pressing it, the same frame of media will be loaded from the
original record train, if it is still available (not overwritten in the
recorder yet). This allows for playback beyond the clip
boundaries or to define a new clip from the original record
media.
4.5.16 G
RAB
F
RAME
OR
The Grab Frame button allows the user to grab a picture of the
frame that is currently loaded or being played on the Control
Panel. Each time the button is selected, a .jpg or .bmp image of
the frame is stored in the directory specified by the user in the
Default path for captured images setting. The user can set this
parameter in the menu Tools > Settings, Image Capture tab.
See also the section 4.13.4 “Image Capture Settings”, on page
76.
If you want to save the image in another folder than the default
one, press the SHIFT while clicking the Grab Frame button. The
standard Save As window will open and allow you to save the
image in the requested folder.