6 loading a record train in pause or play, Insert delay, Append delay – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 180: Loading a record train in pause or play, Pause, Play, Play)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
167
6.8.6 L
OADING A
R
ECORD
T
RAIN IN
PAUSE
OR
PLAY
A train can be loaded on the preview channel by a drag and
drop operation from the control panel. The operation of this
method is the same as loading a train as above with the
exception that the train being loaded could be in pause. If the
train was in pause, the train is loaded on the preview control
panel in PAUSE.
If the channel is in PAUSE, the Insert Clip and Append Clip
buttons are renamed in ‘Insert Delay’ and ‘Append Delay’
The train can be browsed in the preview control panel in order to
set IN and OUT marks.
If Mark IN and/or Mark OUT have been defined on the control
panel prior to loading it to the preview control panel, the Save
Clip button can be used to make a clip if required.
I
NSERTING THE
T
RAIN
(
IN
PAUSE
OR
PLAY)
I
NTO THE
P
LAY
-L
IST
Insert DELAY
The operator can insert the train into the play-list by clicking on
the ‘Insert DELAY’ button. The train is inserted before or after
the selected element in the list depending on the ‘Insert mode in
play-list’ parameter of the play-list settings.
The operator can also insert the train in the play-list by a drag
and drop operation into the list. The drag can be done from all
‘free spaces’ of the panel or from the video display of the panel.
A thicker line in between the 2 elements displays the drop
position where the element will be inserted.
Append DELAY
The operator can append the train into the play-list by clicking
on the ‘Append DELAY’ button. The train is inserted at the end of
the play-list.