EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 162)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment Issue 4.3.C
149
Mute Off
It returns the Audio of an element from a muted state at the
timecode specified using an audio mix of the value entered in the
dialogue box.
When this window is opened, the last value entered is displayed.
Limit values are 00s00 to 20s00.
Note
A Mute tag and a Swap Audio tracks tag cannot be
defined on the same T/C. See below for more
information.
Swap audio tracks
When Swap Audio Tracks is selected as a tag type, the Swap
Audio Tracks window is displayed. For more information on the
Swap Audio Tracks window, refer to the section “Swap Audio
Tracks Window”, on page 149.
S
WAP
A
UDIO
T
RACKS
W
INDOW
When the window opens, the last selection made is displayed. If
it does not correspond to a predefined configuration, “Select a
configuration” is displayed.