Tag information, Swap audio tag, Ag information – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 171
Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
158
ss:ff corresponds to the video effect duration
in seconds and frames.
Spd.Unk
the starting speed defined for the play-list
element. The format corresponds to a
percentage. If unknown, Unk is displayed.
A Eff ss:ff
A Eff corresponds to the audio effect type
defined for the transition of this play-list
element : cut/mix
ss:ff corresponds to the audio effect duration
duration in seconds and frames.
Split +ss:ff
‘Split’ is always displayed.
‘ss:ff’ corresponds to the value of the split-
audio duration in seconds and frames,
‘+ff:ss’ is displayed in case of a positive
value, ‘-ff:ss’ is displayed in case of a
negative value.
T
AG INFORMATION
Tag information should be displayed when a tag is defined on the
on-air field. This information is only displayed on the field where
the tag is defined.
Swap audio tag
ss:ff
Shows the duration of the audio mix defined
to swap the tracks.
Swap information for up to eight tracks where
the audio output track number is first and
then the track it will swap to.
A Eff ss:ff Split
ss:ff
1→3 3→3 5→5
7→7