EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 181)

Issue 4.3.C IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
168
Values with Insert and Append Delay
The train is inserted in the play-list as a play-list element with
the following values:
Field Inserted Values
Mark IN / OUT Values defined by the operator
• If a Mark OUT is not defined, it is
considered to be unknown (open end
play-list element).
• If a Mark IN is not defined, the ‘Insert
DELAY’ and ‘Append DELAY’ buttons are
greyed and un-selectable.
Name Name of the corresponding train recorder
Transition Default parameters defined for the transition
in the play-list settings
C
REATING A CLIP FROM THE PREVIEW CONTROL
PANEL
When a train is loaded on the preview control panel, and if mark
IN and/or mark OUT are defined, the Save Clip button is
available. A clip can be created in exactly the same way as if
using a standard control panel. The ‘Save Clip’ window is
opened based on the ‘Open save clip window …’ parameter in
the settings.
If only a Mark IN or a Mark OUT is defined, the default clip
duration defined in the settings will define the clip duration.
6.8.7 L
OADING AND
M
ODIFYING A PLAY
-
LIST
ELEMENT FROM THE PLAY
-
LIST TAB
A play-list element can be dragged from the play-list list onto the
preview control panel to load it. The element cannot be a
comment line, but could be a group in which case, the first
element of the group is loaded.
This operation allows for the modification of a clip’s properties
within the play-list. When the clip is modified the Update Clip
button becomes active. The modifications are not made into the
play-list until the ‘Update Clip’ button is clicked.