EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 100)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment Issue 4.3.C
87
4.18.7 H
OW TO
M
OVE
E
LEMENTS
W
ITHIN A
P
LAY
-L
IST
To move elements within a play-list, proceed as follows:
1. Select the elements to be moved within the play-list.
For more information, see section 4.18.6.
2. Drag and drop the selected elements to the requested
location within the play-list:
In the drag and drop operation, the new position is
represented by a black thick line.
The elements are dropped where the black line was displayed
when you release the left button of the mouse.
Note
When you move a group within another group, only the
clips of the group are moved but the group is deleted.
When you move a group after the last clip of another
group or before the heading of another group, the group
is moved with all its elements.
4.18.8 A
DDING
E
LEMENTS
T
O A
P
LAY
-L
IST
Adding element(s) to a play-list in the Clip-List tab is always
performed by dragging and dropping the element(s) to the
requested position in the play-list.
In the drag and drop operation, the black thick line indicates the
position where the element will be dropped.