3Com WX4400 3CRWX440095A - Manual (Page 84)

84 C HAPTER 5: C ONFIGURING AND M ANAGING P ORTS AND VLAN S
Use the keys listed in Table 8 to control the monitor display.
To monitor port statistics beginning with octet statistics (the default), type
the following command:
WX1200# monitor port counters
As soon as you press Enter, MSS clears the window and displays statistics
at the top of the window. In this example, the octet statistics are
displayed first.
Port Status Rx Octets Tx Octets
===============================================================================
1 Up 27965420 34886544
...
To cycle the display to the next set of statistics, press the Spacebar. In this
example, packet statistics are displayed next:
Port Status Rx Unicast Rx NonUnicast Tx Unicast Tx NonUnicast
===============================================================================
1 Up 54620 62144 68318 62556
...
(For information about the fields in the output, see the Wireless LAN
Switch and Controller Command Reference .)
Table 8 Key Controls for Monitor Port Counters Display
Key Effect on monitor display
Spacebar Advances to the next statistics type.
Esc Exits the monitor. MSS stops displaying the statistics and
displays a new command prompt.
c Clears the statistics counters for the currently displayed
statistics type. The counters begin incrementing again.