Displaying multicast statistics only, Clearing multicast statistics – 3Com WX4400 3CRWX440095A User Manual
Page 374
374
C
HAPTER
18: C
ONFIGURING
AND
M
ANAGING
IGMP S
NOOPING
237.255.255.255
5
10.10.10.13 00:02:04:06:08:0d
258
237.255.255.255
5
10.10.10.14 00:02:04:06:08:0e
258
237.255.255.255
5
10.10.10.12 00:02:04:06:08:0c
258
237.255.255.255
5
10.10.10.10 00:02:04:06:08:0a
258
Querier information:
Querier for vlan orange
Port Querier-IP
Querier-MAC
TTL
---- --------------- ----------------- -----
1 193.122.135.178 00:0b:cc:d2:e9:b4
23
IGMP vlan member ports: 1,2, 4, 6, 5, 3, 8
IGMP static ports: none
IGMP statistics for vlan orange:
IGMP message type Received Transmitted Dropped
----------------- -------- ----------- -------
General-Queries
0
0
0
GS-Queries
0
0
0
Report V1
0
0
0
Report V2
5
1
4
Leave
0
0
0
Mrouter-Adv
0
0
0
Mrouter-Term
0
0
0
Mrouter-Sol
50
101
0
DVMRP
4
4
0
PIM V1
0
0
0
PIM V2
0
0
0
Topology notifications: 0
Packets with unknown IGMP type: 0
Packets with bad length: 0
Packets with bad checksum: 0
Packets dropped: 4
(For information about the fields in the output, see the
Wireless LAN
Switch and Controller Command Reference
.)
Displaying Multicast Statistics Only
To display multicast statistics only without also displaying all the other
multicast information, use the following command:
display igmp statistics [vlan vlan-id]
Clearing Multicast Statistics
To clear the multicast statistics counters, use the following command:
clear igmp statistics [vlan vlan-id]
The counters begin incrementing again, starting from 0.