3Com WX4400 3CRWX440095A - Manual (Page 204)

204 C HAPTER 10: C ONFIGURING MAP A CCESS P OINTS
keep-initial-vlan disable Reassigns the user to a VLAN after
roaming, instead of leaving the roamed
user on the VLAN assigned by the
switch where the user logged on.
Note: Enabling this option does not
retain the user’s initial VLAN
assignment in all cases.
no-broadcast disable Does not reduce wireless broadcast
traffic by sending unicasts to clients for
ARP requests and DHCP Offers and
Acks instead of forwarding them as
multicasts.
proxy-arp disable Does not reply on behalf of wireless
clients to ARP requests for client IP
addresses. Instead, the radio forwards
the ARP Requests as wireless
broadcasts.
psk-phrase No passphrase
defined Uses dynamically generated keys rather
than statically configured keys to
authenticate WPA clients.
psk-raw No preshared
key defined Uses dynamically generated keys rather
than statically configured keys to
authenticate WPA clients.
rsn-ie disable Does not use the RSN IE in transmitted
frames.
shared-key-auth disable Does not use shared-key
authentication.
This parameter does not enable PSK
authentication for WPA. To enable PSK
encryption for WPA, use the
set radio-profile auth-psk command.
short-retry-count 5 Sends a short unicast frame up to five
times without acknowledgment.
soda disable Sygate On Demand Agent (SODA) files
are not downloaded to connecting
clients.
ssid-name 3Com Uses the SSID name 3Com.
ssid-type crypto Encrypts wireless traffic for the SSID.
static-cos disable Assigns CoS based on the QoS mode
(wmm or svp) or based on ACLs.
Table 10 Defaults for Service Profile Parameters (continued)
Parameter Default Value
Radio Behavior When Parameter
Set to Default Value