beautypg.com

Displaying rf attributes – 3Com WX4400 3CRWX440095A User Manual

Page 321

background image

Displaying RF Auto-Tuning Information

321

To display neighbor information for radio 1 on the directly connected
MAP on port 2, type the following command:

WX1200# display auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC RSSI
------- ----------------- ----

1 00:0b:85:06:e3:60 -46
1 00:0b:0e:00:0a:80 -78
1 00:0b:0e:00:d2:c0 -74
1 00:0b:85:06:dd:00 -50
1 00:0b:0e:00:05:c1 -72

Displaying RF

Attributes

To display the current values of the RF attributes RF Auto-Tuning uses to
decide whether to change channel or power settings, use the following
commands:

display auto-tune attributes
[ap map-num [radio {1 | 2| all}]]
display auto-tune attributes
[ap ap-num [radio {1 | 2| all}]]

To display RF attribute information for radio 1 on the directly connected
MAP on port 2, type the following command:

WX1200# display auto-tune attributes ap 2 radio 1
Auto-tune attributes for port 2 radio 1:
Noise:

-92 Packet Retransmission

Count:

0

Utilization:

0 Phy Errors

Count:

0

CRC Errors count:

122