3Com WX4400 3CRWX440095A - Manual (Page 315)

Overview 315
channel-holddown 900 MSS maintains the channel setting on a
radio for at least 900 seconds regardless
of RF changes.
channel-lockdown disabled MSS continues to dynamically change
channels if needed based on network
conditions.
power-config disable MSS uses the highest power level
allowed for the country of operation or
the highest supported by the hardware,
whichever is lower.
power-interval 600 Every 600 seconds, MSS examines the RF
information gathered from the network
and determines whether the power
needs to be changed to compensate for
RF changes.
power-lockdown disabled MSS continues to dynamically change
power settings if needed based on
network conditions.
power-ramp-interval 60 When RF Auto-Tuning determines that
power should be increased or decreased,
MSS changes the power by 1 dBm every
60 seconds until the power setting is
reached..
Individual radio parameters
max-power Maximum
allowed for
country of
operation RF Auto-Tuning never sets a radio’s
power to a level that is higher than the
maximum allowed for the country of
operation (countrycode).
Table 25 Defaults for RF Auto-Tuning Parameters (continued)
Parameter Default Value
Radio Behavior When Parameter Set
to Default Value