3Com WX4400 3CRWX440095A - Manual (Page 157)

Configuring a Mobility Domain 157
Displaying Mobility
Domain Status
To view the status of the Mobility Domain for the WX switch, use the
display mobility-domain command. For example:
WX# display mobility-domain
Mobility Domain name: pleasanton
Member
State Type (*:active) Model Version
--------------- ------------- --------------- -------- ----------
10.8.121.101 STATE_DOWN SEED
WX-2200 6.0.0.0
10.8.121.102 STATE_UP SECONDARY-SEED* WX-2200 6.0.0.0
10.8.121.103 STATE_UP MEMBER WX-2200 6.0.0.0
10.8.121.104 STATE_UP MEMBER WX-2200 6.0.0.0
Displaying the
Mobility Domain
Configuration
To view the configuration of the Mobility Domain, use the display
mobility-domain config command on either the seed or a nonseed member.
„
To view Mobility Domain configuration on the seed:
WX1200# display mobility-domain config
This WX is the seed for domain Pleasanton.
192.168.12.7 is a member
192.168.15.5 is a member
„
To view Mobility Domain configuration on a member:
WX1200# display mobility-domain config
This WX is a member, with seed 192.168.14.6
Clearing a Mobility
Domain from a WX
Switch
You can clear all Mobility Domain configuration from a WX switch, regardless
of whether the WX switch is a seed or a member of a Mobility Domain.s.
You might want to clear the Mobility Domain to change a WX switch from one
Mobility Domain to another, or to remove a WX switch from the Mobility
Domain. To clear the Mobility Domain, type the following command:
WX1200# clear mobility-domain
success: change accepted
This command has no effect if the WX switch is not configured as part of
a Mobility Domain.
Clearing a Mobility
Domain Member
from a Seed
You can remove individual members from the Mobility Domain on the
seed WX switch. To remove a specific member of the Mobility Domain,
type the following command:
clear mobility-domain member ip-addr
This command has no effect if the WX switch member is not configured
as part of a Mobility Domain or the current WX switch is not the seed.