3Com WX4400 3CRWX440095A - Manual (Page 178)

178 C HAPTER 10: C ONFIGURING MAP A CCESS P OINTS
Figure 8 Example 3Com Network
To configure MAPs, perform the following tasks, in this order:
„
Specify the country of operation.
„
Configure MAP access ports, Distributed AP connections, and dual
homing.
„
If required, configure radio-specific parameters, which include the
channel number, transmit power, and external antenna type.
Router
Router
Wired
authentication
client
System IP address
10.10.10.4
Port
1
Port
2
Port
4
WX1
10.10.40.19/24
10.10.20.19/24
10.10.30.19/24
RADIUS
servers
10.10.70.20
10.10.70.40
10.10.60.18/24
10.10.60.19/24
3WXM
Port
3
Layer 2
Layer 2
10.10.10.19/24
Port
5
VLAN s on WX 1
VLAN 2 mgmt, port 5, 10.10.10.4/24
VLAN 4 blue, port 5, tag 20, 10.10.20.2/24
VLAN 3 red, port 5, tag 30
Layer 2
serial-id M9DE48BDEA200
serial-id M9DE48B6EAD00
serial-id M9DE48B012F00
serial-id M9DE48B123400
serial-id M9DE48B234500
10.10.50.19/24
external antenna
System IP address
10.10.40.4
WX2
System IP address
10.10.40.4
WX3
MAP
MAP
MAP
MAP
MAP