3Com WX4400 3CRWX440095A - Manual (Page 46)

46 C HAPTER 2: WX S ETUP M ETHODS
Quickstart Example This example configures the following parameters:
„
System name: WX1200-Corp
„
Country code (regulatory domain): US
„
System IP address: 172.16.0.21, on IP interface 172.16.0.21
255.255.255.0
The quickstart script asks for an IP address and subnet mask for the
system IP address, and converts the input into an IP interface with a
subnet mask, and a system IP address that uses that interface. Likewise, if
you configure this information manually instead of using the quickstart
command, you must configure the interface and system IP address
separately.
„
Default route: 172.16.0.20
„
Administrative user wxadmin, with password letmein. The only
management access the switch allows by default is CLI access through
the serial connection.
„
System Time and date parameters:
„
Date: 31st of March, 2007
„
Time: 4:36 PM
„
Timezone: PST (Pacific Standard Time), with an offset of -8 hours
from Universal Coordinated Time (UTC)
„
Unencrypted SSID name: public
„
Username user1 and password pass1 for WebAAA
„
Encrypted SSID name: corporate
„
Username bob and password bobpass for 802.1X authentication
„
Directly connected MAPs on port 2, model AP2750
The IP addresses, usernames, and passwords in this document are
examples. Use values that are appropriate for your organization.