3Com WX4400 3CRWX440095A - Manual (Page 504)

504 C HAPTER 21: C ONFIGURING AAA FOR N ETWORK U SERS
Configuring
Accounting for
Wireless Network
Users Accounting records come in three types: start-stop, stop-only, and
update for network users. The records provide information about
network resource usage.
To set accounting, type the following command:
set accounting {admin | console | dot1x |
mac | web | last-resort} {ssid ssid-name | wired}
{user-glob | mac-addr-glob} {start-stop
| stop-only}
method1 [method2] [method3] [method4]
For example, to store start-stop accounting records at example.com for
802.1X users of SSID mycorp in the local database, type the following
command:
WX1200# set accounting dot1x ssid mycorp *@example.com
start-stop local
success: change accepted.
The accounting records can contain the session information shown in
Table 47.
Table 47 Session Information Shown in Accounting Records
Start Records Update and Stop Records
Session date and time Session date and time
Location of authentication (if any):
RADIUS server (1) or local database (2) Location of authentication (if any):
RADIUS server (1) or local database (2)
ID for related sessions ID for related sessions
Username Username
Session duration Session duration
Timestamp Timestamp
VLAN name VLAN name
Client’s MAC address Client’s MAC address
MAP port number and radio number MAP port number and radio number
MAP’s MAC address MAP’s MAC address
Number of octets received by the WX
switch
Number of octets sent by the switch
Number of packets received by the switch
Number of packets sent by the switch