3Com WX4400 3CRWX440095A - Manual (Page 604)

604 C HAPTER 27: M ANAGING S YSTEM F ILES
The following command limits the output to the contents of the
/tmp/core subdirectory:
WX1200# dir core:
===============================================================================
file:
Filename Size Created
core:command_audit.cur 37 bytes Aug 28 2005, 21:11:41
Total: 37 bytes used, 91707 Kbytes free
The following command limits the output to the contents of the boot0
partition:
WX1200# dir boot0:
===============================================================================
file:
Filename Size Created
boot0:WXA30001.Rel
9780 KB Aug 23 2005, 15:54:08
Total: 9780 Kbytes used, 207663 Kbytes free
(For information about the fields in the output, see the Wireless LAN
Switch and Controller Command Reference .)
Copying a File You can perform the following copy operations:
„
Copy a file from a TFTP server to nonvolatile storage.
„
Copy a file from nonvolatile storage or temporary storage to a TFTP
server.
„
Copy a file from one area in nonvolatile storage to another.
„
Copy a file to a new filename in nonvolatile storage.
To copy a file, use the following command.
copy source-url destination-url
A URL can be one of the following:
„
[subdirname/]filename
„
file:[subdirname/]filename
„
tftp://ip-addr/[subdirname/]filename
„
tmp:filename
The filename and file:filename URLs are equivalent. You can use either
URL to refer to a file in a WX switch’s nonvolatile memory.