3Com WX4400 3CRWX440095A - Manual (Page 405)

Enabling Prioritization for Legacy Voice over IP 405
Configuring a Service Profile for RSN (WPA2)
To configure a service profile for SVP phones that use RSN (WPA2):
„
Create the service profile and add the voice SSID to it.
„
Enable the RSN information element (IE).
„
Disable TKIP and enable CCMP.
„
Disable 802.1X authentication and enable preshared key (PSK)
authentication instead.
„
Enter the PSK key.
„
Set the service profile’s VLAN attribute to the name of the VLAN you
create for the voice clients.
The following commands configure a service profile called vowlan-wpa2
for RSN:
WX4400# set service-profile vowlan-wpa2 ssid-name phones
WX4400# set service-profile vowlan-wpa2 rsn-ie enable
WX4400# set service-profile vowlan-wpa2 cipher-tkip disable
WX4400# set service-profile vowlan-wpa2 cipher-ccmp enable
WX4400# set service-profile vowlan-wpa2 auth-dot1x disable
WX4400# set service-profile vowlan-wpa2 auth-psk enable
WX4400# set service-profile vowlan-wpa2 psk-raw
c25d3fe4483e867d1df96eaacdf8b02451fa0836162e758100f5f6b879
65e59d
WX4400# set service-profile vowlan-wpa2 attr vlan-name v1
Configuring a Service Profile for WPA
To configure a service profile for SVP phones that use WPA:
„
Create the service profile and add the voice SSID to it.
„
Enable the WPA information element (IE). This also enables TKIP. Leave
TKIP enabled.
„
Disable 802.1X authentication and enable preshared key (PSK)
authentication instead.
„
Enter the PSK key.
„
Set the service profile’s VLAN attribute to the name of the VLAN you
create for the voice clients.