3Com WX4400 3CRWX440095A - Manual (Page 70)

70 C HAPTER 4: M ANAGING U SER P ASSWORDS
Restoring Access to a
Locked-Out User
If a user’s password has expired, or the user is unable to log in within the
configured limit for login attempts, then the user is locked out of the
system, and cannot gain access without the intervention of an
administrator.
To restore access to a user who had been locked out of the system, use
the
following command:
clear user username lockout
If a user has been locked out of the system because of an expired
password, you must first assign the user a new password before you can
restore access to the user.
The following command restores access to user Nin, who had previously
been locked out of the system:
WX# clear user Nin lockout
success: change accepted.
Displaying Password
Information
User password information can be displayed with the display aaa
command. For example:
WX# display aaa
...
...
set authentication password-restrict enable
set authentication minimum-password-length 10
...
user bob
Password = 00121a08015e1f (encrypted)
Password-expires-in = 59 hours (2 days 11 hours)
status = disabled
vlan-name = default
service-type = 7
(For details on displaying passwords, see the Wireless LAN Switch and
Controller Command Reference .