3Com WX4400 3CRWX440095A - Manual (Page 307)

Encryption Configuration Scenarios 307
4 Verify the AAA configuration changes. Type the following command:
WX1200# display aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server
Addr Ports T/o Tries Dead State
-------------------------------------------------------------------
Server groups
set authentication mac ssid voice * local
mac-usergroup wpa-for-mac
vlan-name = blue
mac-user aa:bb:cc:dd:ee:ff
Group = wpa-for-mac
mac-user a1:b1:c1:d1:e1:f1
Group = wpa-for-mac
5 Create a service profile named wpa-wep-for-mac for SSID voice. Type the
following command:
WX1200# set service-profile wpa-wep-for-mac
success: change accepted.
6 Set the SSID in the service profile to voice. Type the following command:
WX1200# set service-profile wpa-wep-for-mac ssid-name voice
success: change accepted.
7 Enable WPA in service profile wpa-wep-for-mac. Type the following
command:
WX1200# set service-profile wpa-wep-for-mac wpa-ie enable
success: change accepted.
8 Enable the WEP40 cipher suite in service profile wpa-wep-for-mac. Type
the following command:
WX1200# set service-profile wpa-wep-for-mac
cipher-wep40 enable
success: change accepted.
TKIP is already enabled by default when WPA is enabled.
9 Enable PSK authentication in service profile wpa-wep-for-mac. Type the
following command:
WX1200# set service-profile wpa-wep-for-mac auth-psk enable
success: change accepted.