Xantrex Technology XDC - Manual (Page 98)

Operation
Power Supply Operation
96 Operating Manual for XDC Series Power Supply
Editing
Trigger
Source of a
Sequence
When steps are programmed to advance step by trigger, this option allows you to edit
the source of those trigger events.
To edit the sequence’s trigger source:Using Auto Sequencing
Step # Do This You Will See
1 ERROR MSGS
2 6 times or . AUTO SEQ PGM
3 Sequence 1
4 or . Use the scroll
keys to select a sequence to work
with.
Sequence #
5 Edit Sequence
6 or . Use the scroll
keys to select the Trig Source
option.
Trig Source
7 Trig From Man
8 or . Use the scroll
keys to select the trigger source:
•
Man is triggered by pressing the
trigger key.
•
Ext is triggered by the rear external
trigger line.
•
Imm is triggered by receiving an
INIT:IMM command
•
Bus is triggered by a GPIB GET
command or a *TRG command.
Trig from ###
9 Edit Sequence
10
The sequence’s trigger source has
now been changed. Select another
sequence to work with or escape by
pressing
MENU
MENU
ENTER
ENTER
ENTER
ENTER
EXIT