Xantrex Technology XDC - Manual (Page 236)

Specifications and Characteristics
Electrical Specifications—Summary
234 Operating Manual for XDC Series Power Supply
Table E.7Specifications for 12000 Watt units (80V to 600V Models)
Models 80–150 100–120 150–80 300–40 600–20
Output Ratings:
Output Voltage
1
Output Current 2
Output Power
1. Minimum output voltage is <0.3% of rated voltage at zero output setting.
2. Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.
0–80 V
0–150 A
12000 W 0–100 V
0–120 A
12000 W 0–150 V
0–80 A
12000 W 0–300 V
0–40 A
12000 W 0–600 V
0–20 A
12000 W
Line Regulation: 3
Voltage (0.01% of Vmax)
Current (0.1% of Imax)
3. For input voltage variation over the AC input voltage range, with constant rated load.
8 mV
150 mA 10 mV
120 mA 15 mV
80 mA 30 mV
40 mA 60 mV
20 mA
Load Regulation: 4
Voltage (0.05% of Vmax + 5 mV)
Current (0.2% of Imax + 40 mA)
4. For 0–100% load variation, with constant nominal line voltage.
45 mV
340 mA 55 mV
280 mA 80 mV
120 mA 155 mV
100 mA 305 mV
60 mA
Meter Accuracy:
Voltage (0.15% of Vmax)
Current (0.5% of Imax) 120 mV
750 mA 150 mV
600 mA 225 mV
400 mA 450 mV
200 mA 900 mV
100 mA
Output Noise (0–20 MHz):
Voltage (p–p) 100 mV 100 mV 150 mV 250 mV 350 mV
Output Ripple (rms):
Voltage
Current
5
5. Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.
15 mV
640 mA 20 mV
460 mA 20 mV
240 mA 30 mV
100 mA 80 mV
50 mA
OVP Adjustment Range:
(0% to 110% of Vmax) 0–88 V 0–110 V 0–165 V 0–330 V 0–660 V
Efficiency: 6
6. Typical efficiency at nominal input voltage and full output power.
0.89 0.90 0.90 0.91 0.91