Xantrex Technology XDC - Manual (Page 230)

Specifications and Characteristics
Electrical Specifications—Summary
228 Operating Manual for XDC Series Power Supply
Electrical Specifications—Summary
Table E.1Specifications for 6000 Watt units (10V to 60V Models)
Models 10-600 20-300 30-200 40-150 60-100
Output Ratings:
Output Voltage 1
Output Current 2
Output Power
1. Minimum output voltage is <0.3% of rated voltage at zero output setting.
2. Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.
0–10 V
0–600 A
6000 W 0–20 V
0–300 A
6000 W 0–30 V
0–200 A
6000 W 0–40 V
0–150 A
6000 W 0–60 V
0–100 A
6000 W
Line Regulation: 3
Voltage (0.01% of Vmax)
Current (0.05% of Imax)
3. For input voltage variation over the AC input voltage range, with constant rated load.
1 mV
300 mA 2 mV
150 mA 3 mV
100 mA 4 mV
75 mA 6 mV
50 mA
Load Regulation:
4
Voltage (0.05% of Vmax + 5 mV)
Current (0.1% of Imax + 20 mA)
4. For 0–100% load variation, with constant nominal line voltage.
10 mV
620 mA 15 mV
320 mA 20 mV
220 mA 25 mV
170 mA 35 mV
120 mA
Meter Accuracy:
Voltage (0.15% of Vmax)
Current (0.5% of Imax) 15 mV
3 A 30 mV
1.5 A 45 mV
1.0 A 60 mV
750 mA 90 mV
500 mA
Output Noise (0–20 MHz):
Voltage (p–p) 75 mV 75 mV 75 mV 75 mV 100 mV
Output Ripple (rms):
Voltage
Current
5
5. Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.
10 mV
3100 mA 10 mV
1600 mA 12 mV
1000 mA 15 mV
750 mA 15 mV
450 mA
OVP Adjustment Range:
(0% to 103% of Vmax) 0–10.3 V 0–20.6 V 0–30.9 V 0–41.2 V 0–61.8 V
Efficiency: 6
6. Typical efficiency at nominal input voltage and full output power.
0.85 0.87 0.87 0.87 0.89