Appendixb. scpi command reference, Overview, Codes and standards – Xantrex Technology XDC User Manual
Page 195: Ieee 488.2 requirements, Scpi requirements, Appendix b. scpi command reference, Overview codes and standards, Ieee 488.2 requirements scpi requirements, Ndix b. “scpi command reference”, and a, See appendix b, “scpi command reference
Release 3.0
193
Appendix B. SCPI Command Reference
Overview
This appendix provides a summary of the Standard Commands for Programmable
Instruments (SCPI) that are supported by the this Programmable Power Supply.
Codes and Standards
This power supply conforms to the following international standards:
•
IEEE Std 488.2-1992 “IEEE Standard Codes, Formats, Protocols, and Common
Commands For Use With IEEE Std 488.1-1987”
•
IEEE Std 488.1-1987 “IEEE Standard Digital Interface for Programmable
Instrumentation”
•
TIA/EIA-232F
•
Standard Commands for Programmable Instruments (SCPI) Version 1997.0
IEEE 488.2
Requirements
GPIB control implements all IEEE 488.2 requirements.
SCPI
Requirements
The power supply conforms to the following SCPI requirements:
•
SCPI mandated commands
•
Questionable Status Register (QSR), Condition, Event, Enable
•
Operation Status Register (OSR), Condition, Event, Enable
•
Status Byte Register (SBR)
•
Standard Event Status Register (SESR)