Xantrex Technology XDC - Manual (Page 234)

Specifications and Characteristics
Electrical Specifications—Summary
232 Operating Manual for XDC Series Power Supply
Table E.5Specifications for 12000 Watt units (10V to 60V Models)
Models 10-1200 20-600 30-400 40-300 60-200
Output Ratings:
Output Voltage 1
Output Current 2
Output Power
1. Minimum output voltage is <0.3% of rated voltage at zero output setting.
2. Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.
0–10 V
0–1200 A
12000 W 0–20 V
0–600 A
12000 W 0–30 V
0–400 A
12000 W 0–40 V
0–300 A
12000 W 0–60 V
0–200 A
12000 W
Line Regulation:
3
Voltage (0.01% of Vmax)
Current (0.1% of Imax)
3. For input voltage variation over the AC input voltage range, with constant rated load.
1 mV
1200 mA 2 mV
600 mA 3 mV
400 mA 4 mV
300 mA 6 mV
200 mA
Load Regulation:
4
Voltage (0.05% of Vmax + 5 mV)
Current (0.2% of Imax + 40 mA)
4. For 0–100% load variation, with constant nominal line voltage.
10 mV
2440 mA 15 mV
1240 mA 20 mV
840 mA 25 mV
640 mA 35 mV
440 mA
Meter Accuracy:
Voltage (0.15% of Vmax)
Current (0.5% of Imax) 15 mV
6 A 30 mV
3 A 45 mV
2.0 A 60 mV
1.5 A 90 mV
1 A
Output Noise (0–20 MHz):
Voltage (p–p) 75 mV 75 mV 75 mV 75 mV 100 mV
Output Ripple (rms):
Voltage
Current
5
5. Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.
10 mV
6200 mA 10 mV
3200 mA 12 mV
2000 mA 15 mV
1500 mA 15 mV
900 mA
OVP Adjustment Range:
(0% to 103% of Vmax) 0–10.3 V 0–20.6 V 0–30.9 V 0–41.2 V 0–61.8 V
Efficiency: 6
6. Typical efficiency at nominal input voltage and full output power.
0.85 0.87 0.87 0.87 0.89