Xantrex Technology XDC - Manual (Page 202)

200
Operating Manual for
XDC Series Power Sup
ply
SCPI Command Re
fe
rence
SCPI C
omman
d Summary
Table B.2Readback Commands
Save Default Settings *SDS
[:]SYSTem[]:SAVE:DEFault Save the factory default settings. N/A
Query Service Request
Enable *SRE?
[:]STATus[]:SREQuest:ENABle? Query the Service Request Enable Register
bits. N/A
Service Request Enable *SRE
[:]STATus[]:SREQuest:ENABle Set the Service Request Enable Register
bits. N/A
Read Status Byte *STB?
[:]STATus[]:SBYTe[EVENt]? Read the status byte and Master Summary
Status bit. N/A
Trigger *TRG Trigger commands. Analogous to the IEEE
488.1 defined Group Execute Trigger
interface message. See IEEE 488.2 section
6.1.4.2.5 N/A
Self-Test Query *TST?
[:]SYSTem[]:TEST? Internal self-test and responds indicating
whether or not the device completed the
self-test without any detected errors. N/A
Wait To Continue *WAI
[:]SYSTem[]:WAIT Prevents the device from executing any
further commands or queries until the
no-operation-pending flag is TRUE.(*OPC?) N/A
Function SCPI Command Description Query
Read Output Current [:]MEASure[][:SCALar]:CURRent[:DC]? Read output current N/A
Read Output Power [:]MEASure[][:SCALar]:POWer[:DC]? Read output power N/A
Read Output Voltage [:]MEASure[][:SCALar][:VOLTage][:DC]? Read output voltage N/A