ZyXEL Communications Multi-service Access Platform MSAP2000 - Manual (Page 208)

8. System Management
MSAP2000 Technical Manual V3.0 8-2
8.2. Local Craft Terminal (LCT)
User can connect terminal or PC installed with terminal emulation
soft-ware to MSAP2000 by RS-232 straight cable. The DB9
connector located at the lower-right corner of MSAP2000 is the
physical connector for connecting the terminal device. Please
refer the UI operation manual for more detail.
The LCT allows users to access a menu-driven operation mode
locally and conduct management of System functions such as
Operation, Administration, Maintenance and Provisioning
(OAM&P).
MSAP2000’s menu-driven mode allows for management of the
following functions:
„ Configuration
„ Performance
„ Fault
„ Maintenance
„ Security
„ Administration
„ Logout
„ Help
For security reason, the LCT supports username and password
authentication. The default username is “admin”, while the
default password is “0000”. It is recommended that the user
should change the default password during initial login, and then
create new username and password with different privilege if
necessary.