beautypg.com

3 back to factory defaults – ZyXEL Communications NBG410W3G User Manual

Page 335

background image

Chapter 20 Maintenance

NBG410W3G Series User’s Guide

335

After you see a “restore configuration successful” screen, you must then wait one minute
before logging into the ZyXEL Device again.

Figure 205 Configuration Upload Successful

The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 206 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
your Quick Start Guide for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 207 Configuration Upload Error

20.7.3 Back to Factory Defaults

Click the Reset button to clear all user-entered configuration information and return the
ZyXEL Device to its factory defaults as shown on the screen. The following warning screen
appears.