ZyXEL Communications NBG410W3G - Manual (Page 269)

Chapter 15 Remote Management
NBG410W3G Series User’s Guide
269
15.8 Configuring SSH
Click ADVANCED > REMOTE MGMT > SSH to change your ZyXEL Device’s Secure
Shell settings.
"
It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.
Figure 168 ADVANCED > REMOTE MGMT > SSH
The following table describes the labels in this screen.
Table 77 ADVANCED > REMOTE MGMT > SSH
LABEL DESCRIPTION
Server Host Key Select the certificate whose corresponding private key is to be used to identify the
ZyXEL Device for SSH connections. You must have certificates already configured
in the My Certificates screen (Click My Certificates and see Chapter 11 on page
195 for details).
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.