beautypg.com

Static route, 1 ip static route, Chapter 13 static route – ZyXEL Communications NBG410W3G User Manual

Page 243: Figure 147 example of static routing topology, Static route (243)

background image

NBG410W3G Series User’s Guide

243

C

H A P T E R

13

Static Route

This chapter shows you how to configure static routes for your ZyXEL Device.

13.1 IP Static Route

The ZyXEL Device usually uses the default gateway to route outbound traffic from local
computers to the Internet. To have the ZyXEL Device send data to devices not reachable
through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL Device’s LAN
interface. The ZyXEL Device routes most traffic from A to the Internet through the default
gateway (R1). You create one static route to connect to services offered by your ISP behind
router R2. You create another static route to communicate with a separate network behind a
router (R3) connected to the LAN.

Figure 147 Example of Static Routing Topology

WAN

R1

R2

A

R3

LAN