ZyXEL Communications NBG410W3G - Manual (Page 251)

Chapter 14 DNS
NBG410W3G Series User’s Guide
251
The following table describes the labels in this screen.
14.6.2 Inserting a Name Server Record
Click Insert in the System screen to open this screen. Use this screen to insert a name server
record. A name server record contains a DNS server’s IP address. The ZyXEL Device can
query the DNS server to resolve domain names for features such as DDNS and the time server.
A domain zone may also be included. A domain zone is a fully qualified domain name without
the host. For example, zyxel.com.tw is the domain zone for the www.zyxel.com.tw fully
qualified domain name.
Figure 152 ADVANCED > DNS > Insert (Name Server Record)
Table 75 ADVANCED > DNS > Add (Address Record)
LABEL DESCRIPTION
FQDN Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a
host name and continues all the way up to the top-level domain name. For
example, www.zyxel.com.tw is a fully qualified domain name, where “www” is the
host, “zyxel” is the second-level domain, and “com.tw” is the top level domain.
IP Address If this entry is for one of the WAN ports on a ZyXEL Device with multiple WAN
ports, select WAN Interface and select WAN 1 or WAN 2 from the drop-down list
box.
If this entry is for the WAN port on a ZyXEL Device with a single WAN port, select
WAN Interface.
For entries that are not for the WAN port(s), select Custom and enter the IP
address of the host in dotted decimal notation.
Enable Wildcard Select the check box to enable DNS wildcard.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.