ZyXEL Communications NBG410W3G - Manual (Page 155)

Chapter 8 Wi-Fi
NBG410W3G Series User’s Guide
155
The following table describes the security modes you can configure.
Figure 88 WIRELESS > Wi-Fi > Security
The following table describes the labels in this screen.
Table 31 Security Modes
SECURITY MODE DESCRIPTION
None Select this to have no data encryption.
WEP Select this to use WEP encryption.
802.1x-Only Select this to use 802.1x authentication with no data encryption.
802.1x-Static64 Select this to use 802.1x authentication with a static 64bit WEP key and an
authentication server.
802.1x-Static128 Select this to use 802.1x authentication with a static 128bit WEP key and
an authentication server.
WPA Select this to use WPA.
WPA-PSK Select this to use WPA with a pre-shared key.
WPA2 Select this to use WPA2.
WPA2-MIX Select this to use either WPA2 or WPA depending on which security mode
the wireless client uses.
WPA2-PSK Select this to use WPA2 with a pre-shared key.
WPA2-PSK-MIX Select this to use either WPA-PSK or WPA2-PSK depending on which
security mode the wireless client uses.
Table 32 WIRELESS > Wi-Fi > Security
LABEL DESCRIPTION
Security Profile
Index This is the index number of the security profile.
Profile Name This field displays a name given to a security profile in the Security configuration
screen.
Security Mode This field displays the security mode this security profile uses.
Action Click the edit icon to configure security settings for that profile.
Click the reset default icon to clear all user-entered configuration information and
return the security profile to its factory defaults.