ZyXEL Communications NBG410W3G - Manual (Page 250)

Chapter 14 DNS
NBG410W3G Series User’s Guide
250
14.6.1 Adding an Address Record
Click Add in the System screen to open this screen. Use this screen to add an address record.
An address record contains the mapping of a fully qualified domain name (FQDN) to an IP
address. Configure address records about the ZyXEL Device itself or another device to keep a
record of DNS names and addresses that people on your network may use frequently. If the
ZyXEL Device receives a DNS query for an FQDN for which the ZyXEL Device has an
address record, the ZyXEL Device can send the IP address in a DNS response without having
to query a DNS name server. See
Section 14.4 on page 248 for more on address records.
Figure 151 ADVANCED > DNS > Add (Address Record)
Domain Zone A domain zone is a fully qualified domain name without the host. For example,
zyxel.com.tw is the domain zone for the www.zyxel.com.tw fully qualified
domain name.
From This field displays whether the IP address of a DNS server is from a WAN
interface (and which it is) or specified by the user.
DNS Server This is the IP address of a DNS server.
Modify Click a triangle icon to move the record up or down in the list.
Click the edit icon to go to the screen where you can edit the record.
Click the delete icon to remove an existing record. A window display asking you
to confirm that you want to delete the record. Note that subsequent records
move up by one when you take this action.
Insert Click Insert to open a screen where you can insert a new name server record.
Refer to Table 76 on page 252 for information on the fields.
LABEL DESCRIPTION