ZyXEL Communications NBG410W3G - Manual (Page 259)

NBG410W3G Series User’s Guide
259
C
H A P T E R
15
Remote Management
This chapter provides information on the Remote Management screens.
15.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
The following figure shows secure and insecure management of the ZyXEL Device coming in
from the WAN. HTTPS and SSH access are secure. HTTP and Telnet access are not secure.
Figure 156 Secure and Insecure Remote Management From the WAN
"
When you configure remote management to allow management from any
network except the LAN, you still need to configure a firewall rule to allow
access. See
Chapter 9 on page 167 for details on configuring firewall rules.
You can also disable a service on the ZyXEL Device by not allowing access for the service/
protocol through any of the ZyXEL Device interfaces.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Console port
2 SSH
LAN WAN
HTTP
Telnet
Internet
HTTPS
SSH