ZyXEL Communications NBG410W3G - Manual (Page 292)

Chapter 17 Custom Application
NBG410W3G Series User’s Guide
292
Figure 181 ADVANCED > Custom APP
The following table describes the labels in this screen.
Table 86 ADVANCED > Custom APP
LABEL DESCRIPTION
Application Select the application for which you want the ZyXEL Device to monitor specific ports.
You can use the same application in more than one entry. To remove an entry, select
Select a Type.
Description Enter information about the reason for monitoring custom port numbers for this
protocol.
Start Port Enter the starting port for the range that the ZyXEL Device is to monitor for this
application. If you are only entering a single port number, enter it here.
End Port Enter the ending port for the range that the ZyXEL Device is to monitor for this
application.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.