ZyXEL Communications NBG410W3G - Manual (Page 158)

Chapter 8 Wi-Fi
NBG410W3G Series User’s Guide
158
Figure 91 WIRELESS > Wi-Fi > Security: 802.1x Only
The following table describes the labels in this screen.
8.4.4 IEEE 802.1x + Static WEP
Click the WIRELESS > Wi-Fi > Security > Edit. Select 8021X-Static 64 or 8021X-
Static128 in the Security Mode field to display the following screen.
Table 35 WIRELESS > Wi-Fi > Security: 802.1x Only
LABEL DESCRIPTION
Name Type a name to identify this security profile.
Security Mode Select 8021X-Only from the drop-down list.
ReAuthentication
Timer
Specify how often wireless clients have to resend user names and passwords in
order to stay connected. Enter a time interval between 600 and 65535 seconds.
If wireless client authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout The ZyXEL Device automatically disconnects a wireless client from the wireless
network after a period of inactivity. The wireless client needs to send the username
and password again before it can use the wireless network again. Some wireless
clients may prompt users for a username and password; other clients may use
saved login credentials. In either case, there is usually a short delay while the
wireless client logs in to the wireless network again.
This value is usually smaller when the wireless network is keeping track of how
much time each wireless client is connected to the wireless network (for example,
using an authentication server). If the wireless network is not keeping track of this
information, you can usually set this value higher to reduce the number of delays
caused by logging in again.
Enter a time interval between 600 and 65535 seconds.
Authentication
Databases
Click Local User to go to the Local User Database screen where you can view
and/or edit the list of users and passwords. Click RADIUS to go to the RADIUS
screen where you can configure the ZyXEL Device to check an external RADIUS
server.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.