beautypg.com

Figure 158 advanced > remote mgmt > www, Table 76 advanced > remote mgmt > www – ZyXEL Communications NBG410W3G User Manual

Page 262

background image

Chapter 15 Remote Management

NBG410W3G Series User’s Guide

262

Figure 158 ADVANCED > REMOTE MGMT > WWW

The following table describes the labels in this screen.

Table 76 ADVANCED > REMOTE MGMT > WWW

LABEL

DESCRIPTION

HTTPS

Server

Certificate

Select the Server Certificate that the ZyXEL Device will use to identify itself. The

ZyXEL Device is the SSL server and must always authenticate itself to the SSL

client (the computer which requests the HTTPS connection with the ZyXEL Device).

Authenticate

Client

Certificates

Select Authenticate Client Certificates (optional) to require the SSL client to

authenticate itself to the ZyXEL Device by sending the ZyXEL Device a certificate.

To do that the SSL client must have a CA-signed certificate from a CA that has been

imported as a trusted CA on the ZyXEL Device (see

Appendix F on page 403

on

importing certificates for details).

Server Port

The HTTPS proxy server listens on port 443 by default. If you change the HTTPS

proxy server port to a different number on the ZyXEL Device, for example 8443,

then you must notify people who need to access the ZyXEL Device web

configurator to use “https://ZyXEL Device IP Address:8443” as the URL.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device

using this service.
You can allow only secure web configurator access by clearing all of the interface

check boxes in the HTTP Server Access field and setting the HTTPS Server

Access field to an interface(s).

Secure Client IP

Address

A secure client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to

access the ZyXEL Device using this service.

HTTP

Server Port

You may change the server port number for a service if needed, however you must

use the same port number in order to use that service for remote management.