ZyXEL Communications NBG410W3G - Manual (Page 313)

Chapter 19 Logs Screens
NBG410W3G Series User’s Guide
313
Connect to Daytime server
fail The router was not able to connect to the Daytime server.
Connect to Time server fail The router was not able to connect to the Time server.
Connect to NTP server fail The router was not able to connect to the NTP server.
Too large ICMP packet has
been dropped The router dropped an ICMP packet that was too large.
Configuration Change: PC =
0x%x, Task ID = 0x%x The router is saving configuration changes.
Successful SSH login Someone has logged on to the router’s SSH server.
SSH login failed Someone has failed to log on to the router’s SSH server.
Successful HTTPS login Someone has logged on to the router's web configurator
interface using HTTPS protocol.
HTTPS login failed Someone has failed to log on to the router's web configurator
interface using HTTPS protocol.
DNS server %s was not
responding to last 32
consecutive queries… The specified DNS server did not respond to the last 32
consecutive queries.
DDNS update IP:%s (host %d)
successfully The device updated the IP address of the specified DDNS
host name.
SMTP successfully The device sent an e-mail.
Table 97 System Error Logs
LOG MESSAGE DESCRIPTION
%s exceeds the max.
number of session per
host! This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
setNetBIOSFilter: calloc
error The router failed to allocate memory for the NetBIOS filter
settings.
readNetBIOSFilter: calloc
error The router failed to allocate memory for the NetBIOS filter
settings.
WAN connection is down. A WAN connection is down. You cannot access the network
through this interface.
DHCP Server cannot assign
the static IP %S (out of
range). The LAN subnet, LAN alias 1, or LAN alias 2 was changed and
the specified static DHCP IP addresses are no longer valid.
The DHCP static IP %s is
conflict. The static DHCP IP address conflicts with another host.
SMTP fail (%s) The device failed to send an e-mail (error message included).
SMTP authentication fail
(%s) The device failed to authenticate with the SMTP server (error
message included).
Table 96 System Maintenance Logs (continued)
LOG MESSAGE DESCRIPTION