ZyXEL Communications NBG410W3G - Manual (Page 274)

Chapter 15 Remote Management
NBG410W3G Series User’s Guide
274
The following table describes the labels in this screen.
15.14 SNMP
Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. SNMP is a member of the TCP/IP protocol suite. Your
ZyXEL Device supports SNMP agent functionality, which allows a manager station to manage
and monitor the ZyXEL Device through the network. The ZyXEL Device supports SNMP
version one (SNMPv1). The next figure illustrates an SNMP management operation.
"
SNMP is only available if TCP/IP is configured.
Table 79 ADVANCED > REMOTE MGMT > FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings.
Reset Click Reset to begin configuring this screen afresh.