Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 82)

White Balance
82
White Balance
The camera uses an electronic white balance process to calibrate the picture and produce accurate colors under
different lighting conditions. The camera offers the following ways to set the white balance.
You can also perform this function remotely using Browser Remote on a connected network device (
A
179).
Custom white balance: You can use a gray card or white object with no pattern to establish the white balance
and set it to one of two custom white balance positions,
Å
A or
Å
B. When recording under fluorescent lights,
we recommend setting the custom white balance.
Preset white balance: Set the white balance to
¼
(daylight) or
É
(tungsten lamp). You can further adjust the
color temperature (K) value and the color compensation (CC) value, which adjusts the color along the green/
magenta gradation.
Color temperature: Allows you to set the color temperature between 2,000 K and 15,000 K, and further adjust
the color compensation (CC) value.
Auto white balance (AWB): The camera automatically adjusts the white balance to the optimal level.
NOTES NOTES
• The [White Balance] and [Color Matrix Tuning] settings in the custom picture file (
A
131) take precedence
over the white balance set with these procedures.
• You can use the > [
v
Camera Setup] > [Shockless WB] setting to make the transition look smoother
when you change the white balance settings.
• The color temperatures displayed on the screen are approximate. Use them only as a reference.
White Balance Mode
S elect a white balance mode u s ing the direct s etting mode (
A
57).
• You can also use direct touch control (
A
56).
• If you set > [
B
System Setup] > [Grip Control Dial], [Top Control Dial] or [Control Ring] to [White
Balance Mode], you can change the white balance mode using the control dials or control ring of an RF lens.
NOTES NOTES
• If you set an assignable button to [ AWB]. [
Å
Set A], [
Å
Set B], [
¼
Daylight], [
É
Tungsten] or [
È
Kelvin] (
A
121), you can press the button to change the white balance mode temporarily. Press the button
again to return to the previous white balance mode.
Cu s tom White Balance
1 S elect the Å A or Å B icon (
A
82).
• To apply the stored custom white balance setting as is, the rest
of the procedure is not necessary. To set a new custom white
balance, continue the procedure.
2 Point the camera at a gray card or white object s o that it fill s
the center of s creen.
• Use the same lighting conditions you plan to use when
recording.