Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens User Manual
Page 195
195
Menu Option
s
[Ctrl Dial in Menus]
[Disable],
[Enable]
(
A
Enables or disables the use of the front and top control dials to navigate the setup menus, direct touch
control, direct setting mode and status screens.
[Focus Ring Operation]
[Enable During AF]
, [Disable During AF]
[Focus Ring Direction]
[Reverse],
[Normal]
Changes the direction of the adjustment when operating the focus ring on an RF lens.
[Focus Ring Response]
[Varies with Rotation Speed]
, [Linked to Rotation Degree]
[Keep Key Lock at Shutdown]
[On],
[Off]
(
A
[Key Lock]
[All Buttons],
[All Except REC Button]
(
A
[REC Button]
[Disable],
[Enable]
(
A
Enables or disables the use of the REC buttons.
[Assign. Button 10 as REC],
[Assign. Button 13 as REC]
[On],
[Off]
(
A
This setting turns assignable button 10/13 to an alternative REC button.
[Onscreen REC/STBY Button]
[On],
[Off]
(
A
When this setting is set to [On], the recording operation indicator (REC/STBY) on the CAMERA mode
screen becomes an onscreen button you can touch to start/stop recording.
[Touch Screen Response]
[Normal]
, [Low]
(
A
[Tally Lamp],
[Card Access LED]
[On]
, [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp]: The tally lamp (
A
12) when the camera starts up and while recording.
[Card Access LED]: The card access indicator (
A
34) when the camera is accessing the card.
[Fan Mode]
[Automatic],
[Always On]
(
A
[Fan Speed (STBY)]
[Maximum], [High], [Middle],
[Low]
[Fan Speed (REC)],
[Fan Speed (Always)], [Fan Speed]
[High], [Middle],
[Low]
[Review Recording]
[Entire Clip]
, [Last 4 sec]
(
A
[GPS Auto Time]
2
[On],
[Off]
When this setting is set to [On], the camera automatically adjust its date and time settings according to
the information received from the GPS signal.
• While the automatic date/time adjustment is activated, the
> [
B
System Setup] > [Date/
Time] setting will not be available.
• The time will not be updated while recording video.
[USB Mode]
[Video Output (UVC)], [Canon App(s) for iPhone],
[PTP Connection/GP-E2]
(
A
Select [PTP Connection/GP-E2] when connecting the GP-E2 GPS Receiver to the camera's accessory
shoe.
[Retract Lens]
[On]
, [Off]
When a compatible lens (
A
235) is attached to the camera and the focus mode switch on the lens is set
to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
When this setting is set to [On], turning off the camera will move the focus position. To prevent this, set
this setting to [Off]. Note that there is no guarantee that the focus position will not move, so checking the
focus position is recommended when turning on the camera.
[Shutter at Shut Down]
[Close]
, [Open]
This setting allows you to choose whether the shutter closes or remains open when the power switch is
set to OFF.
• The [Close] setting is recommended during normal use in order to protect the camera's sensor from
dust or dirt when changing lenses.
• Select the [Open] setting when you want to reduce the sound caused by setting the power switch from
VIDEO to OFF or from OFF to VIDEO.
Menu item
Setting options and additional information