Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 125)

125
Cu s tom Picture S etting s
Cu s tom Picture Setting s
The camera lets you change many settings ( A 129) that control various aspects of the image produced. As a
set, all these settings are treated as a single custom picture file. After adjusting the desired settings to your
preference, you can save up to 20 custom picture files (in the camera or on an SD card), and load them later to
apply exactly the same settings (
A 128). You can also save the custom picture file as part of the metadata
recorded with XF-AVC clips (
A
128).
Custom picture settings do not affect the recording or output of RAW clips.
Selecting Cu s tom Picture File s
In CAMERA mode, select a custom picture file to apply its settings to your recordings or to edit, rename, protect,
or transfer it.
1 S elect > [ / Cu s tom Picture] > [ S elect / File].
• The custom picture file selection screen is displayed.
• Select one of the custom picture files saved in the camera (C1 to C20). To use the settings of a custom
picture file saved on an SD card, copy the file to the camera in advance ( A 128).
• You can also use direct touch control's
Æ
recording settings (
A
56).
2 S elect the de s ired file.
• When you close the menu, the selected custom picture file’s settings will be applied.
Pre s et Picture Setting s
The following settings are saved to custom picture files C1 to C20 as preset custom picture settings. Custom
picture files C1 to C7 are protected by default and need to be unprotected before they can be edited.
* ITU-R BT.2100 is a standard for a color bit depth of 10 or 12 bits. When the video configuration is set to one of the 8 bit color
options, the gamma curve is approximately equivalent to this standard.
Preset custom
picture file
[Gamma/Color Space] [Color Matrix] [Look File] Characteristics
C1: [BT.70 9
Wide DR]
[BT.70 9 Wide DR /
BT.70 9 ]
[Neutral] –
These settings produce a wide dynamic range and are appropriate
for playback on BT.70
9 compliant monitors.
C2: [Canon Log 3]
[Canon Log 3 /
C.Gamut]
[Neutral] –
These settings use Canon Log 3 gamma and require post-
production processing. They keep the [Canon Log] gamma
characteristics while expanding its dynamic range.
C3: [PQ] [PQ / BT.2020] [Neutral] –
These settings use a high dynamic range gamma curve compliant
with the PQ standard defined by ITU-R BT.2100.*
C4: [HLG] [HLG / BT.2020] [Neutral] –
These settings use a high dynamic range gamma curve compliant
with the HLG standard defined by ITU-R BT.2100.*
C5: [BT.70 9
Standard]
[BT.70 9 Standard /
BT.70 9 ]
[Video] –
These settings are appropriate for playback on BT.70 9 compliant
monitors, and use a gamma curve that meets ITU-R BT.70 9
standards.
C6: [EOS Standard]
[BT.70 9 Wide DR /
BT.70 9 ]
[Neutral] On
Reproduces the image quality and look of an EOS interchangeable
lens DSLR camera with its picture style set to [Standard].
C7: [EOS Neutral]
[BT.70 9 Wide DR /
BT.70 9 ]
[Neutral] On
Reproduces the image quality and look of an EOS interchangeable
lens DSLR camera with its picture style set to [Neutral].
C8: [User08] to
C20: [User20]
[BT.70 9 Wide DR /
BT.70 9 ]
[Neutral] –
These settings use a gamma curve with a very wide dynamic
range, optimized for playback on BT.70
9 compliant monitors.