Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 147)

147
Connecting to an External Monitor or Recorder
Connecting to an External Monitor or Recorder
When you connect the camera to an external device, be it a monitor (to monitor the recording or for playback) or
an external video recorder (for recording), adjust the required settings in the menu. For details about output
signals, refer to
Video Output Configuration (
A
145).
Connection diagram
NOTES
• It is recommended to use the supplied cable protector when connecting a commercially available HDMI cable
to the camera. For details on the cable protector, refer to the Advanced User Guide (PHOTO edition).
• Powering the camera from a power outlet using the DC coupler and an AC adapter is recommended.
U s ing the HDMI OUT Terminal
The digital signal that is output from the HDMI
TM
OUT terminal includes the video signal and audio signal. You
can output also the time code signal, recording command and various assistance displays (onscreen displays,
markers, etc.) in order to check them also on an external monitor.
1 Connect the HDMI cable to the HDMI OUT terminal.
2 S elect > [ B S y s tem S etup] > [HDMI Output S ignal] > De s ired option.
3 To output the time code s ignal, s elect > [
Æ
Recording/Media S etup] > [HDMI Time Code] >
[On].
NOTES
• You can set > [
B
System Setup] > [Linked to HDMI Monitor] to [On] to automatically change the HDMI
OUT terminal’s output resolution according to the capabilities of the connected monitor. When this setting is
set to [Off], the output resolution is set according to the menu settings and if the connected monitor is not
compatible with the signal output from the camera, HDMI output will stop.
• The HDMI OUT terminal is for output only. Do not connect the camera to another device’s output terminal
using the HDMI OUT terminal as this will cause a malfunction.
• Correct operation cannot be guaranteed when connecting the camera to DVI monitors.
• If the camera’s time code is being output and > [
Æ
Recording/Media Setup] > [Rec Command] is set
to [On], you can use the camera’s REC button to control also the recording operation of an external recorder
connected to the HDMI OUT terminal.
HDMI OUT terminal
HDMI cable (commercially available)
External
monitor/
digital video
recorder
HDMI inputs