Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 161)

161
Configuring Connection S etting s
Adding a New Connection Setting U s ing the Wizard
You can use the wizard to set up a new connection setting. This section uses a connection to a Wi-Fi network
using the WPS push button method as an example. Refer to the instruction manual of the access point for
details about the location and operation of the WPS button.
1 Enable the networ k function s (
A
160).
2 S elect > [ Networ k S etting s ] > [New Conn. S etting (Wizard)] > De s ired networ k function >
[OK].
3 S elect [Create New Comm. S etting].
• Once you have added multiple communication settings, you can select [Select Existing Setting] to reuse the
settings for a network that you saved previously.
4 S elect [Wi-Fi ].
• To configure a wired (Ethernet) network (
A
165).
5 S elect [Connect with WP S ] > [WP S (Pu s h Button)].
• To use a different configuration method, complete the corresponding procedure.
Camera Access Point (
A
165)
WPS using a PIN code (
A
166)
Detected access points (
A
166)
SSID/authentication mode input (
A
167)
Manual setup without connecting to the network (
A
167)
6 Pre ss and hold the WP S button on the wirele ss router and then, on the camera, s elect [OK].
7 To configure the IPv4 s etting s automatically and not u s e IPv6 s etting s , s elect [Automatic S etting] >
[Di s able].
• To configure IPv4 settings manually (
A
167).
• To use the default IPv6 settings, select [Enable] instead. After completing the wizard, change the IPv6
settings as necessary (
A
171).
8 S elect [OK] to continue to configure the function s etting s .
• The communication settings are saved to an [NW] file.
• Continue with one the following procedures to configure the selected function’s settings.
FTP transfer (
A
162), IP streaming (
A
163), Browser Remote (
A
164), Canon App (
A
164)
NOTES
• The [WPS (Push Button)] method may not work correctly depending on the devices used or the surrounding
conditions. In such case try using [WPS (PIN Code)] (
A
166) or selecting one of the detected networks
(
A
166).