Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 22)

U s ing the Menu s
22
U s ing the Menu s
Many of the camera’s functions can be adjusted using the menus. In CAMERA mode, you can also register
frequently used menu settings in a customized menu (My Menu) for easy access. For details about the available
menu options and settings, refer to
Menu Options (
A
185).
Selecting an Option from the Menu
The following is a step-by-step explanation of how to select a typical option from the setup menus. Some menu
items may require additional steps. Such operations will be explained in the respective section of the manual.
For brevity's sake, references to menu settings throughout the manual will be abbreviated as follows:
> [
B
System Setup] > [Language
H
] > Desired option
1 Pre ss the MENU button.
• The menu opens. The icon displayed in orange is the menu item that was selected the last time the menu
was closed (unless the camera was turned off).
• When a menu icon is not selected, first push the joystick up or press the CANCEL button to move the
orange selection frame to one of the icons.
2 Pu s h the joy s tic k left/right to s elect the icon of the de s ired s etup menu.
• You can also use the top control dial.
• You can also touch the desired menu icon.
SELECT dial
Turn the dial to move the orange selection
frame in the menu.
SET button
Press the SET button to confirm a selection.
CANCEL button
Press to return to the previous menu/submenu
level or to stop some operations that are in
progress.
Joy s tick
When making a menu selection, push the
joystick to move the orange selection frame in
the menu. Then, press the joystick itself to
select the menu item indicated by the orange
selection frame.
Top control dial
When the menu is open, turn the dial to
move to the next/previous setup menu.
Grip control dial
When the menu is open, turn the
dial to move to the next/previous
menu page.
MENU button
Press the button to open the setup
menus and then press again to close
the menu after adjusting desired
settings.