Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 47)

3
47
Recording
Recording Video
This section explains the basics of recording clips*. For details on recording audio, refer to Recording Audio
(
A
102).
* “Clip” refers to a single movie unit recorded with a single recording operation. You can also include metadata and News
Metadata ( A 111) with the clip.
Recording
* Can be assigned to function as a REC button (
A
121).
1 S et the power s witch to VIDEO.
• The message [Be careful when taking CFexpress out. It may become hot after recording.] is displayed when
turning the camera on in VIDEO mode for the first time, or when resetting the camera's settings. Select [OK]
to close the screen.
• The camera turns on in CAMERA mode and enters record standby mode ([STBY]). The power indicator (tally
lamp) illuminates in green.
• The access indicator will illuminate momentarily in red, then go out afterwards.
2 Pre ss the REC button to begin recording.
• Recording starts. The tally lamp changes from green (power indicator) to red and the recording indicator at
the top of the screen changes from [STBY] to [
Ü
REC].
• The access indicator will illuminate in red.
• You can also perform this function remotely using Browser Remote on a connected network device (
A
180).
3 Pre ss the REC button to s top recording.
• The clip is recorded and the camera enters record standby mode. The tally lamp changes from red to green
(power indicator).
• The access indicator goes out.
*
*
Access indicator
Power indicator/
Tally lamp
REC button