Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 29)

29
Preparing the Camera
Checking the Required Type of Power Source (Power Source Navigation)
Using the power source navigation function you can check the recording settings that are available based on the
lens/accessories attached, current recording configuration (recording format/frame rate) and the power source
used.
Types of power source: Battery pack, PD-E1 USB Power Adapter and DR-E6C DC Coupler.
Checking the Power Source
1 Select > [
B
System Setup] > [Power Source Navigation] > [Check the required power source.].
2 Select the type of lens.
3 Select the recording format and frame rate combination (multiple selection is possible).
• The required power source configuration is displayed.
Checking the Recording Settings
1 Select > [
B
System Setup] > [Power Source Navigation] > [Check the available recording settings.].
2 Select the type of lens.
3 Select the type of power source.
• If you use a commercially available accessory compatible with the multi-function shoe (e.g. the XLR
Microphone Adapter), check the [Power XLR Mic Adapter from Camera] checkbox when supplying power
from the camera.
• The available recording format/frame rate is displayed.
RF/EF Lenses: Available Recording Settings and Power Source Configuration
Other power sources: PD-E1 USB Power Adapter, DR-E6C DC Coupler
Sensor mode
Recording
format
Resolution
System frequency/Frame rate
High: 59.94 Hz
Medium: 50.00 Hz
Low: 24.00 Hz
Using a battery pack 1
Other power
sources
Power supply to a commercially
available accessory
Yes No
Full frame
RAW ST
RAW LT
8192x4320
31-60
26-60
25-60
– –
Ь 2
1-30
1-25
1-24
Ь Ь Ь
HDMI RAW
29.97, 23.98
25.00
24.00 Ь Ь Ь
MP4 (HEVC)
1-30
1-25
1-24
Ь Ь Ь
XF-AVC
MP4 (HEVC)
MP4 (H.264)
4096x2160
3840x2160
2048x1080
1920x1080
1280x720
31-120
26-120
25-120
Ь 3 Ь Ь
1-30
1-25
1-24
Ь Ь Ь