Yaskawa CIMR-AU 200V Drives - Manual (Page 22)

1.1 Model Number and Nameplate Check
Please perform the following tasks after receiving the drive:
• Inspect the drive for damage.
If the drive appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate.
• If you have received the wrong model or the drive does not function properly, contact your supplier.
u Nameplate
J
I
H
G
E
B
A
PRG:
IND.CONT.EQ.
7J48 B
YASKAWA ELECTRIC CORPORATION MADE IN JAPAN
: CIMR-A
PASS
MODEL
INPUT
OUTPUT
MASS
O / N
S / N
FILE NO
TYPE 1 ENCLOSURE
REV : A
: AC3PH 200-240V 50/60Hz 24A/18.9A
: AC3PH 0-240V 0-400Hz 21A/17.5A
: 3.7 kg
:
:
: E131457 IP20
C/C CIMR-A
2-1 Kurosaki-shiroishi, Yahatanishi-Ku, Kitakyushu 806-0004 Japan
D
F C
□□□□
□□□□□□□□□□
□□□□□□□□□□
A – Normal Duty Amps / Heavy Duty
Amps
B – Software version
C – CE and TÜV Certification
<1>
D – Enclosure type
E – Address
<2>
F – Serial number
G – Lot number
H – Output specifications
I – Input specifications
J – AC drive model
Figure 1.1 Nameplate Information Example
<1> Certification is model-dependent. Refer to Standards Compliance on page 345 for details.
<2> The address of the head office of Yaskawa Electric Corporation (responsible for product liability) is shown on the nameplate.
1.1 Model Number and Nameplate Check
22 YASKAWA ELECTRIC TOEP C710616 41E YASKAWA AC Drive - A1000 Quick Start Guide