5 adding comments, 5 a dding comments – HEIDENHAIN TNC 410 User Manual

Page 53

4 Programming: Fundamentals of NC, File Management, Programming Aids

Magnifying or reducing a detail

You can select the graphics display by selecting a detail with the
frame overlay. You can now magnify or reduce the selected detail.

Select the soft-key row for detail magnification/reduction
(second row, see figure at right)
The following functions are available:

Principle

Soft key

Reduce the frame overlay — press and
hold the soft key to reduce the detail

Enlarge the frame overlay — press and
hold the soft key to magnify the detail

Shift the frame

With the WINDOW DETAIL soft key, Confirm the
selected area.

With the WINDOW BLK FORM soft key, you can restore the original
section.

4.5 Adding Comments

To explain or identify program steps you can enter comment blocks.

Select the block after which the comment is to be inserted.

Initiate the programming dialog with the semicolon key “;” on
the alphabetic keyboard.

Enter your comment and conclude the block by pressing the END
key.

4.5 A

dding Comments